Shop Full Width - Page 3 of 8

Kverneland Qualidisc Pro

The Kverneland compact disc harrow, Qualidisc Pro in working width of 2.0 to 7.0m Stubble cultivation, seedbed preparation, cover crop seeding, shallow and deeper cultivation, all alike, require excellent penetration, cutting and consolidation quality. The Qualidisc Pro is ready for all these different tasks with powerful and efficient performance. The machine can operate at high forward speeds of 18 to 20km/h maintaining a full cut over the entire working width at a consistent working depth (up to 15cm) in all types of conditions

Foldable Power Harrow NG-S 101 F35

The Kverneland Foldable Power Harrow NG-S 101 F35 is the result of effective co-operation between cultivation and seeding experts to construct a “state of the art” strong and effective implement designed for tractors up to 400 hp. This power harrow is available in working widths of 4.5 to 6.0m. The foldable power harrow has the same heavy-duty self-supporting trough design as used on the mounted models and is equipped with the same robust conical bearings and hardened gears. In order to give the NG-S 101 F35 the strongest design and to enable it to withstand the toughest of conditions the upper half of the trough as well as the trough base is made from 10 mm steel plate. The welded conical bearing housings give highest strength to the overall trough.

Kverneland M series

The Kverneland M series is a medium-sized power harrow for tractors up to 140HP. It is the lightest model within the Kverneland range of power harrows. Still, the M series offers strength and durability due to the heavy-duty headstock and the self-supporting trough. The optional ‘Quick-Fit’ tine holders and double conical bearings ensure optimum performance. The trough of the M series consists of one bended part which is bolted on top. The design comes along without any welding parts for increased stability. The M series can, therefore, be combined with a seed drill as e.g. the e-drill compact.

Kverneland DTX

As a result of growing farms and shorter weather periods, time has become a valuable factor. Therefore, the DTX combines different operations in one pass to save time. Designed as a mounted one-pass stubble incorporator/soil loosener for tractors in the 200-360hp range, the DTX is extremely versatile. It can be used for first entry with non-inversion tillage or to knock down ploughing whilst loosening down to 40cm. It is also ideally suited to establish oilseed rape straight into stubble as it leaves a very levelled, fine and consolidated seedbed. The DTX also offers very good trash clearance. The front tines are staggered and the rear discs allow a full cut and mix from 2 to 10cm deep. The Kverneland DTX combines the tines (Pro-Lift or LD) with the proven disc section of the short disc harrow Qualidisc Farmer (Ø 520mm). Soil can be loosened with the Pro-Lift or LD tines down to 40cm while the top soil layer up to 10cm is incorporated with the disc sections. Tines and disc segment as well as the roller DD600 are connected in a high quality frame box which allows the operation even in heavy conditions. The DTX is equipped with side deflectors which are well-known from the Qualidisc range. This ensure perfect levelling in all types of conditions

Kverneland iXter A

The Power of Simplicity! The iXter A will be added to the Kverneland mounted field sprayer range. The iXter A is available with 800, 1000 and 1200 litre tank capacity in combination with two different boom types: the HOSA aluminium spray boom (12-15m) and the HC boom (18-20-21m). Pumps are available with capacities of 100, 150 and 200 l/min. The iXter A is an easy to operate sprayer with the control panel, chemical inductor, hand wash tank and clean cloth locker all on the same side of the sprayer. Operation can be made via the easy-to-use FlowMate Control spray computer.

Kverneland iXter B

Kverneland iXter B - The Power of Technology The Kverneland iXter B mounted sprayer is the fruit of years of research and development in close collaboration with farmers: this is today the most advanced mounted sprayer range with focus on user friendliness and environmental protection. With iXflow-E individual nozzle control and a completely new iXspray hardware and software platform Kverneland can offer a high tech mounted sprayer with a high level of user friendliness for the professional farmer segment.

Kverneland iXtrack T3

Kverneland iXtrack T3 - made for Farmers, made by Farmers The iXtrack T3 trailed sprayer is developed with focus on a short, low and compact design in combination with intelligent electronics and ease of use. The iXtrack T3 sprayer offers tank sizes of 2600 and 3200 litres.

Kverneland Exacta TLX GEOSPREAD

High speed spreading The Kverneland Exacta TLX GEOSPREAD has almost exactly the same specifications as the Exacta TL GEOSPREAD, but comes with a newly designed CentreFlow system with 8 capacity vanes on each disc for a perfect overlap, no matter how fast you are driving. With 1 metre sections, 4 load cells and a reference sensor, the Kverneland Exacta TLX GEOSPREAD can do high speed spreading under all circumstances. This Exacta TLX GEOSPREAD spreader is ISOBUS compatible and AEF certified. You can operate the spreader in combination with the IsoMatch Tellus PRO, IsoMatch Tellus GO+ or any other ISOBUS compatible tractor terminal.

Kverneland 2624M 2628M 2632M Side Mounted Disc Mowers

Side Mounted Disc Mowers Kverneland offers a rear mounted disc mower series with working widths of 2.40-3.16 m. Kverneland 2600 M series offers a very reliable performance, easy handling and high output at low power requirements.

Rakaerator 7400

Featuring a 7.4m working width; three-point linkage (CAT II and CAT III); and fast, effective hydraulic folding for safe transport, the RAKAERATOR has been created for farmers and contractors as the perfect complement for McConnel’s new low-disturbance SEEDAERATOR drill. With its low horsepower requirements, wide working width and a working speed of up to 25 km/h, the Rakaerator is one of the most productive rakes on the market.

Grassland Shakaerator

McConnel’s celebrated Grassland Shakaerator series is a high-performance deep-soil conditioner with a proven track record for easing compaction, enhancing drainage and promoting crop and grass growth.

Shakaerator 300 Classic

One of McConnel's most popular cultivation products, the Shakaerator 300 Classic is a deep soil conditioner that has proven itself all over the world in a wide variety of different weather and soil conditions.

Shakaerator 3000

The latest incarnation of the classic Shakaerator design, the Shakaerator 3000 features a 3.0m working width and delivers outstanding deep soil conditioning.

Shakaerator 400 & 500 Classic

SHAKAERATOR 400 AND 500 CLASSIC A value-for-money high output sub-soiler with an innovative folding-wing frame design, the Shakaerator 400 and 500 Classic have been created for farmers looking for performance and value, who want the versatility to switch working widths to match soil conditions and different tractors.

Shakaerator 4000 & 5000

McConnel's largest and most productive deep soil conditioners with working widths up to 5.0m, the Shakaerator 4000 and 5000 are ideal for improving drainage, relieving compaction, and delivering greater crop yields.

Discaerator 3000

An outstanding single-pass deep soil cultivator, the Discaerator 3000 incorporates surface trash and stubble; heaves and aerates soil; and then consolidates the surface for a weather-proof finish - saving time, money, and fuel consumption.

Discaerator 4000 5000 6000

McConnel’s biggest and most productive single-pass cultivators are available in 4.0m, 5.0m and 6.0m working widths and feature smooth and effective hydraulic folding. Equipped with two rows of shock-resistant concave discs which break up clods to create a fine tilth, the Discaerator range delivers the perfect conditions for crop establishment.

Premium Front Mounted Presses

Available in 3.0m and 4.0m working widths, the machine features 700mm rings with a 45-degree profile for smooth, even consolidation. Optional spring-mounted levelling boards shatter clods, break down plough ridges and level the ground. Heavy-duty hydraulic folding ensures the machine can be safely transported on the road, while its innovation two-section design delivers superb visibility behind the wheel.

Twose Classic Line Front Press

With a wide choice of 10 different models available, McConnel front presses offer exceptional choice and flexibility for both farmers and contractors. Available in working widths from 1.50m to 4.00m, the presses feature a self-steering mechanism, easy-clean chains and work in perfect combination with the company’s high-quality rear mounted rollers.

Consolidator 3 Gang Rollers

An easy-to-use, cost effective roller designed for farmers seeking performance and value for money. This range comes in three different working widths from 6.40m to 8.20m and can be equipped with a choice of two different rings, with or without breakers. Built from fabricated steel, the machine is hard-wearing and durable while end-pivot wings ensure the rollers closely follow the contours of the ground. Optional levelling boards: Spring-mounted levelling boards shatter clods, break down plough ridges, and level the ground to deliver smooth and even consolidation.

Limerick (Ger) 087 7873105 | Kerry (Flor) 087 7010657